Arduino eeprom sayı kaydetme

#include <EEPROM.h>
long ss;
long address=0;


void setup() {
    EEPROM.begin(512);
    ss = EEPROMReadlong(address);
    Serial.begin (9600);
    }

void loop() {

   ss++;
   EEPROMWritelong(address,ss);
   delay(100);
   Serial.print("ss  ");
   Serial.println (ss, DEC);
   EEPROM.commit();
  }  


void EEPROMWritelong(int address, long value)
{
 //Decomposition from a long to 4 bytes by using bitshift.
 //One = Most significant -> Four = Least significant byte
 byte four = (value & 0xFF);
 byte three = ((value >> 8) & 0xFF);
 byte two = ((value >> 16) & 0xFF);
 byte one = ((value >> 24) & 0xFF);
 //Write the 4 bytes into the eeprom memory.
 EEPROM.write(address, four);
 EEPROM.write(address + 1, three);
 EEPROM.write(address + 2, two);
 EEPROM.write(address + 3, one);
}
long EEPROMReadlong(long address)
{
 //Read the 4 bytes from the eeprom memory.
 long four = EEPROM.read(address);
 long three = EEPROM.read(address + 1);
 long two = EEPROM.read(address + 2);
 long one = EEPROM.read(address + 3);
 //Return the recomposed long by using bitshift.
 return ((four << 0) & 0xFF) + ((three << 8) & 0xFFFF) + ((two << 16) & 0xFFFFFF) + ((one << 24) & 0xFFFFFFFF);
}